top of page
J & C O'Meara | Woodworking Machinery | UK
Genisis Compact Edge Bander

Genisis Compact Edge Bander

The Genisis compact is not your typical entry level edge banding machine. From the strength of build to the high specification, this machine gives a reliable, easy to use, flexible solution to anyone processing MDF/MFC panels.


The Teflon coated quick release gluepot has 2 independent temperature zones, one to the tank and one to the application roller with automatic lowering of the temperature when the machine is not in use. Heat up time is around 15 minutes.


The machine can process panels up to 60mm in thickness and has 2 x independent high frequency end trim saws, 2 x top and bottom high frequency flush trimmers, top and bottom profile scrapers with quick exclusion and top and bottom buffers.


Working at 10 m/min ensures efficiency and productivity for edging tape ranging from 0.4 to 3mm in thickness.

Genisis Compact


Minimum working height


Maximum working height


Minimum length


Minimum width


Minimum thickness of edge


Maximum thickness of edge


Feed Speed

10 m/min

Front and back trimming motor

2 x 0.22 Kw, 12,000 RPM

Top and Bottom trimming motor

2 x 0.55 Kw, 12,000 RPM

Top and bottom profile scrapers

Quick exclusion

Top and bottom buffers

2 x 0.18 Kw, 2,800 RPM

Dust extraction outlets

1 x 100mm dia + 2 x 120mm dia

Compressed air requirement

6.5 Bar

Total Installed Power requirement

6.9 Kw

Overall dimensions L x B x H

2790 x 1142 x 1685mm


910 Kg

bottom of page