Sedgwick TE 350
Introducing the all new Sedgwick TE 350 tenoner, now with horizontally mounted tenon blocks capable of up to a 150mm length tenon.
This all new machine is manufactured by long established M Sedgwick & Co based in Leeds, West Yorkshire anmd carries on the tradition of rugged engineering to give a machine that is easy to use but built to work.
Machine Specification
| TIMBER CAPACITY mm | 300 x 300mm |
| MAXIMUM TENON LENGTH | 150mm |
| TABLE SIZE mm | 765 x 340 (765x300 useful) |
| TABLE WORKING HEIGHT | 890mm |
| TABLE QUADRANT ADJUSTMENT | +/- 0-60 degrees |
HORIZONTAL TENONING HEADS
| CUTTERBLOCKS | 150 x 150 x 30mm |
| MAX TOOLING DIAMETER | 155mm (BOTTOM) 200mm (TOP) |
| VERTICAL ADJUSTMENT OF BOTTOM CUTTERBLOCK | -2mm / + 77mm |
| VERTICAL ADJUSTMENT OF TOP CUTTERBLOCK | +4mm / + 150mm |
| HORIZONTAL ADJUSTMENT OF TOP CUTTERBLOCK | -50mm /+ 20mm |
| DUST EXTRACTION OUTLETS | 2 x 150mm |
| MOTOR RATING | 2 x 2.2 Kw (S6 40%) |
| FULL LOAD CURRENT | 4.75 AMPS |
| STARTING CURRENT | 35 AMPS |
VERTICAL SPINDLE
| SHAFT DIAMETER | 40mm |
| EFFECTIVE LENGTH OF SHAFT | 205mm |
| VERTICAL MOVEMENT | 140mm |
| HORIZONTAL MOVEMENT | 150mm |
| MAXIMUM TOOLING DIAMETER | 350mm |
| SPINDLE SPEED | 4000 RPM |
| MOTOR RATING | 5.5Kw (S1) |
| FULL LOAD CURRENT | 11.5 AMPS |
| STARTING CURRENT | 69 AMPS |
ELECTRICAL
| VOLTAGE / FREQUENCY | 3 PHASE + EARTH; 400/230 V – 50/60 Hz |
| REQUIRED FUSE SIZE | 25A/ph |
| REQUIRED CABLE SIZE | 4mm2 |